Dual Leds, Front-Panel And Side-Panel (Magnum Es42 Series); Hardware Operated Alarm Contact For Monitoring Power - GarrettCom Magnum ES42 Series Installation And User Manual

ES42 Series Edge Switches

4.3 Dual LEDs, Front-panel and side-panel (Magnum ES42 Series)

LED Description
PWR Illuminates GREEN to indicate power applied.
LK/ ACT Steady ON for LINK w/no traffic, blinking for activity per port. LINK will turn
off in the event connectivity is lost between the ends of the twisted pair segment
or a loss of power occurs in the unit or remote device. The Link ports are also
represented by LA1, LA2, LA3...LA6. (Steady On or steady Off indicates no
Receive Activity).
10/100
Steady ON for 100Mb speed, OFF for 10Mb speed per port (copper ports)
F/H (FH1, FH2) Steady ON for Full duplex (F/D) mode, OFF for Half duplex (H/D)
mode per port (For fiber port only)
NOTE: The port#1 and 2 is being assigned for copper or fiber port for different models. On
all copper 10/100 ports model (e.g ES42-d), the LEDs 10 or 100 denotes for
copper port only. For the model 4copper +2 fiber or 5copper +1fiber,(e.g ES42H-
ff-Hd) the F or H denotes for fiber port only.
www GarrettCom com . .
Installation and User Guide (05/05)
60