GarrettCom Magnum 6K32T Hardware User Manual page 47

Magnum 6K32T & 6K32TRC Managed Switch
6K8-BLNK) to cover the slot opening in the front panel. This will maintain proper
cooling air flow, safety, and operation as required by FCC, CE, and other regulations.
Step 6. Now screw down the daughter board with 7 #440 screws except the last two at
the end, so that it holds the daughter board securely. The figure below shows the
top view of 6KPM card after successfully installing the 6KPM cards inside the
6K32TRC Switch
Step 7. Once the installation of granddaughter and daughter modules is done properly,
the front panel screen plates(come along with the 6K-module) need to be properly placed
on the front of the chassis cover to complete the installation process.
www GarrettCom com . .
Installation and User Guide 05/07)
NOTE:. When leaving
6KPM slots empty, always
use a face plate (Magnum
Magnum 6K32T &
6K32TRC.
Fig. 3.5.2g Top View :
6KPM Module installed
inside a 6K32T &
42
Fig.3.5.2f: Securely
latching up 6KPM
Cards into a
Magnum 6K32T &
6K32TRC & 6K32