Lcd Panel | Utilities Menu - MakerBot Replicator 2x User Manual

DiAgNOSTiCS
UTiLiTiES
monitor mode
Change Filament
Level Build Plate
home Axes
jog mode
run Startup Script
Enable Steppers
Disable Steppers
Blink LEDs
Calibrate Nozzles
E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
52

LCD PANEL | UTILITIES MENU

Displays the current temperature of the extruder and
build plate. When printing an object, displays the
percent completed.
Scripts that walk you through tasks associated with
the MakerBot Filament. Load Right and Load Left walk
you through the process of loading MakerBot Filament
and Unload Right and Unload Left walk you through
unloading it.
Script that walks you through the process of leveling
the build plate.
Moves the build plate and the extruder to the default
"home" positions.
Allows you to control the movements of the extruder
and platform via the LCD panel.
Script that walks you through the initial tasks to configure
the MakerBot Replicator 2X for your first 3D print.
Engages the stepper motors. You cannot manually
move the build platform or the extruder when the
stepper motors are engaged. This option appears only
when the stepper motors are disengaged.
Disengages the stepper motors. You can manually
move the build platform or the extruder only when the
stepper motors are disengaged. This option appears
only when the stepper motors are engaged.
Blinks the LED lights on the MakerBot Replicator 2X
at about 4 blinks per second. When the LED lights are
blinking, this option is replaced by Stop Blinking.
Allows you to set the correct alignment for the two
extruder nozzles.