Lcd Panel | Utilities Menu - MakerBot Replicator 2 User Manual

DIAGNOSTICS
UTILITIES
Monitor Mode
Change Filament
Level Build Plate
Home Axes
Jog Mode
Run Startup Script
Enable Steppers
Disable Steppers
Blink LEDs

LCD PANEL | UTILITIES MENU

Displays the current temperature of the extruder. When
making an object, displays the percent completed.
Scripts that walk you through tasks associated with
the MakerBot PLA Filament.
LOAD: Script that walks you through the process of
loading the MakerBot PLA Filament.
UNLOAD: Script that walks you through the process
of unloading the MakerBot PLA Filament.
Script that walks you through the process of leveling
the build plate.
Moves the build plate and the extruder to the default
"home" positions.
Allows you to control the movements of the extruder
and platform via the LCD panel.
Script that walks you through initial tasks to configure
the MakerBot Replicator 2 for your first build.
Engages the stepper motors. You cannot manually
move the build platform or the extruder when the
stepper motors are engaged. This option appears only
when the stepper motors are disengaged.
Disengages the stepper motors. You can manually
move the build platform or the extruder only when the
stepper motors are disengaged. This option appears
only when the stepper motors are engaged.
Blinks the LED lights on the MakerBot Replicator 2 at
about 4 blinks per second. When the LED lights are
blinking, this option is replaced by Stop Blinking.
TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
49