MakerBot Replicator 2x User Manual page 45

USiNg mAKErBOT mAKErwArE
Save and Make Your File | Continued
5
5c. Accept the default settings and click the Make It! button. MakerWare will slice your model
and send it to your MakerBot Replicator 2X for 3D printing.
TIP: You can cancel a slice or print by clicking the X at the corner of the slicing progress bar or the cancel
button in the Status submenu.
Updating MakerBot MakerWare
We're always working to make MakerWare better. Update your copy of MakerWare to
the latest version to ensure that you always have access to the newest features.
A pop-up will appear in MakerWare when a new version is available for download.
To download a new version of MakerWare, go to makerbot.com/makerware and follow
the installation instructions from Chapter D.
USiNg rEPLiCATOr g
You can also use the open source ReplicatorG software to view and manipulate
files from thingiverse.com and to send files to your MakerBot Replicator 2X.
To download the ReplicatorG software, go to replicat.org/download.
To configure the ReplicatorG software to work with your MakerBot Replicator 2X,
go to makerbot.com/support/replicatorg/documentation/usage.
CONTINUED
D MAkING AN OBJECT WITH MAkERBOT MAkERWARE 45