5. Remove the keyboard (see
6. Remove the display assembly (see
7. Remove the display bezel (see
8. Remove the M2 x 3-mm screw that secures the camera/microphone assembly.
9. Lift the camera/microphone out of the top cover and disconnect the camera/microphone cable.
1 M2 x 3-mm screw
Replacing the Camera and Microphone Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
NOTE:
This procedure assumes that you have completed the removal procedure first.
1. Connect the camera/microphone cable to the connector on the camera/microphone assembly.
2. Position the camera/microphone in the top cover and replace the M2 x 3- mm screw that secures the camera/microphone assembly to the top cover.
3. Replace the display bezel (see
4. Replace the display assembly (see
5. Replace the keyboard (see
6. Replace the hinge cover (see
7. Replace the WLAN card (see
8. Replace the hard drive (see
Back to Contents Page
Removing the
Keyboard).
Removing the Display
Assembly).
Removing the Display
Bezel).
Replacing the Display
Bezel).
Replacing the Display
Assembly).
Replacing the
Keyboard).
Replacing the Hinge
Cover).
Replacing a WLAN
Card).
Replacing the Hard
Drive).