CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
NOTE:
This procedure assumes that you have completed the removal procedure first.
1. Position the DC power module in the computer and connect the DC- power module connector to the system board.
2. Replace the system board (see
3. Replace the USB daughter card (see
4. Replace the optical drive (see
5. Connect the cable that secures the card with Bluetooth wireless technology to the system board (see
6. Replace the palm rest (see
7. Replace the display assembly (see
8. Replace the keyboard (see
9. Replace the hinge cover (see
10. Replace the fan (see
Replacing the
11. Replace the WLAN card (see
12. Replace the hard drive (see
Back to Contents Page
Replacing the System Board
Assembly).
Replacing the USB Daughter
Replacing the Optical
Drive).
Replacing the Palm
Rest).
Replacing the Display
Assembly).
Replacing the
Keyboard).
Replacing the Hinge
Cover).
Fan).
Replacing a WLAN
Card).
Replacing the Hard
Drive).
Card).
Replacing the
Card).