Display Inverter - Dell Vostro 1310 Service Manual

Display Inverter
Removing the Display Inverter
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1. Follow the instructions in Before Working on Your
2. Remove the hard drive (see
3. Remove the WLAN card (see
4. Remove the hinge cover (see
5. Remove the keyboard (see
6. Remove the display assembly (see
7. Remove the display bezel (see
8. Remove the M2 x 3-mm screw from the display inverter.
9. Disconnect the two display-inverter connectors.
10. Lift the display inverter out of the top cover.
1 top cover 2 display inverter connector
3 M2 x 3-mm screw

4 display inverter

5 display inverter connector
NOTICE: Removal of the bezel from the top cover requires extreme care to avoid damage to the bezel.
Replacing the Display Inverter
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
NOTE: This procedure assumes that you have completed the removal procedure first.
1. Connect the two display-inverter connectors to the display inverter.
2. Replace the M2 x 3-mm screw that secures the display inverter.
3. Replace the display bezel (seeReplacing the Display
Computer.
Removing the Hard Drive).
Removing a WLAN Card).
Removing the Hinge Cover).
Removing the Keyboard).
Removing the Display Assembly).
Removing the Display Bezel).
Bezel).