Replacing The Camera And Microphone Assembly - Dell 1525 - Inspiron - Pentium Dual Core 1.86 GHz Service Manual

10. Replace the center control cover (see
Camera and Microphone Assembly
Removing the Camera and Microphone Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Follow the instructions in Before You
2. Remove the center control cover (see
3. Remove the keyboard (see
4. Remove the display assembly (see
5. Remove the display bezel (see
6. Remove the display panel (see
7. Disconnect the camera cable connector from the camera and microphone asssembly.
8. Lift the camera and microphone assembly out of the display cover.
1 camera cable connector 2 camera/microphone assembly

Replacing the Camera and Microphone Assembly

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Follow the instructions in Before You
2. Place the camera/microphone assembly on the display cover.
3. Connect the camera cable connector to the camera/microphone assembly.
Back to Contents Page
Replacing the Center Control
Begin.
Removing the Center Control
Removing the Keyboard).
Removing the Display Assembly).
Removing the Display Bezel).
Removing the Display Panel).
Begin.
Cover).
Cover).