Back to Contents Page
USB Daughter Card
Service Manual
Removing the USB Daughter Card
Replacing the USB Daughter Card
Removing the USB Daughter Card
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1. Follow the instructions in
Before Working on Your
2. Remove the hard drive (see
3. Remove the WLAN card (see
4. Remove the hinge cover (see
5. Remove the keyboard (see
6. Remove the display assembly (see
7. Remove the palm rest (see
8. Remove the M2.5 x 5-mm screw from the daughter card.
9. Disconnect the daughter card connector from the daughter card.
10. Remove the daughter card from the computer base.
1
daughter card connector
3
USB daughter card
Replacing the USB Daughter Card
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
NOTE:
This procedure assumes that you have completed the removal procedure first.
1. Replace the M2.5 x 5-mm screw to secure the daughter card to the computer base.
2. Connect the daughter card connector to the daughter card.
Computer.
Removing the Hard
Drive).
Removing a WLAN
Card).
Removing the Hinge
Cover).
Removing the
Keyboard).
Removing the Display
Assembly).
Removing the Palm
Rest).
2
M2.5 x 5-mm screw