Ieee 1394 Device Problems; Lockups And Software Problems; The Computer Does Not Start Up; The Computer Stops Responding - Dell Vostro 1310 Service Manual

Service manual
Hide thumbs Also See for Vostro 1310:
Table of Contents

Advertisement

The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to
continue the desired action.
4.  Follow the instructions on the screen.
 

IEEE 1394 Device Problems

 
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
NOTE:
Your computer supports only IEEE 1394a standard.
 
Ensure that the cable for the IEEE 1394 device is properly inserted into the device and into the connector on the computer
Ensure that the IEEE 1394 device is enabled in system setup —
on your computer or at support.dell.com.
 
Ensure that the IEEE 1394 device is recognized by Windows —
Windows XP:
1.  Click Start and click Control Panel.
2.  Under Pick a Category, click Performance and Maintenance® System® System Properties ® Hardware® Device Manager.
Windows Vista:
1.  Click Start
® Control Panel® Hardware and Sound.
2.  Click Device Manager.
If your IEEE 1394 device is listed, Windows recognizes the device.
 
If you have problems with a Dell IEEE 1394 device —
Contact Dell Support. 
 
If you have problems with an IEEE 1394 device not provided by Dell —
 

Lockups and Software Problems

 
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
 

The computer does not start up

 
Check the diagnostic lights —
See
Power
Problems.
 
Ensure that the power cable is firmly connected to the computer and to the electrical outlet

The computer stops responding

 
NOTICE:
You may lose data if you are unable to perform an operating system shutdown.
 
Turn the computer off —
If you are unable to get a response by pressing a key on your keyboard or moving your mouse, press and hold the power button for
at least 8 to 10 seconds (until the computer turns off), and then restart your computer.
 

A program stops responding

 
 For more information on using the system setup program, see the Dell™ Technology Guide
Contact the IEEE 1394 device manufacturer.
 
 

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents