Wds Screen - ZyXEL Communications NBG4604 User Manual

Chapter 7 Wireless LAN
The following table describes the labels in this screen.
Table 34 Network > Wireless LAN > Scheduling
LABEL
Enable Wireless
LAN Scheduling
Action
Day
Except for the
following times
(24-Hour
Format)
Apply
Reset

7.11 WDS Screen

A Wireless Distribution System is a wireless connection between two or more APs.
Use this screen to set the operating mode of your NBG4604 to AP + Bridge or
Bridge Only and establish wireless links with other APs. You need to know the
MAC address of the peer device, which also must be in bridge mode.
Note: You must enable the same wireless security settings on the NBG4604 and on
all wireless clients that you want to associate with it.
96
DESCRIPTION
Select this to enable Wireless LAN scheduling.
Select On or Off to specify whether the Wireless LAN is turned on or off.
This field works in conjunction with the Day and Except for the
following times fields.
Select Everyday or the specific days to turn the Wireless LAN on or off.
If you select Everyday you can not select any specific days. This field
works in conjunction with the Except for the following times field.
Select a begin time using the first set of hour and minute (min) drop
down boxes and select an end time using the second set of hour and
minute (min) drop down boxes. If you have chosen On earlier for the
WLAN Status the Wireless LAN will turn off between the two times you
enter in these fields. If you have chosen Off earlier for the WLAN Status
the Wireless LAN will turn on between the two times you enter in these
fields.
Note: Entering the same begin time and end time will mean the
whole day.
Click Apply to save your changes back to the NBG4604.
Click Reset to reload the previous configuration for this screen.
NBG4604 User's Guide