ZyXEL Communications NBG4604 User Manual page 68

Chapter 6 Tutorials
Open the Status screen. Verify your wireless and wireless security settings under
5
Device Information and check if the WLAN connection is up under Interface
Status.
Figure 33 Tutorial: Status Screen
6.2.2.1 Configure Your Notebook
Note: We use the ZyXEL M-302 wireless adapter utility screens as an example for the
wireless client. The screens may vary for different models.
The NBG4604 supports IEEE 802.11b, IEEE 802.11g and IEEE 802.11n wireless
1
clients. Make sure that your notebook or computer's wireless adapter supports
one of these standards.
Wireless adapters come with software sometimes called a "utility" that you install
2
on your computer. See your wireless adapter's User's Guide for information on
how to do that.
After you've installed the utility, open it. If you cannot see your utility's icon on
3
your screen, go to Start > Programs and click on your utility in the list of
programs that appears. The utility displays a list of APs within range, as shown in
the example screen below.
68
NBG4604 User's Guide