Remote Management; Chapter 17 Remote Management; Overview; What You Can Do - ZyXEL Communications NBG4604 User Manual

C
H A P T E R

17.1 Overview

This chapter provides information on the Remote Management screens.
Remote management allows you to determine which services/protocols can access
which NBG4604 interface (if any) from which computers.
You may manage your NBG4604 from a remote location via:
• LAN only
Note: When you configure remote management to allow management from the LAN
and WAN in the options above, you still need to configure a firewall rule to allow
access. See the firewall chapters for details on configuring firewall rules.
Note: The Remote MGMT screens are accessible to the supervisor level account
only.
Note: The Remote MGMT screens should be configured with Access Control Rule
(Section 13.5 on page
Internet.

17.2 What You Can Do

Use the WWW screen
World Wide Web settings.
• Use the Telnet screen
interface(s) and from which IP address(es) users can use Telnet to manage the
NBG4604.
• Use the FTP screen
interface(s) and from which IP address(es) users can use FTP to access the
NBG4604.
• Your NBG4604 can act as an SNMP agent, which allows a manager station to
manage and monitor the NBG4604 through the network. Use the SNMP screen
(see Section 17.7 on page
from which IP addresses the access can come.
NBG4604 User's Guide

Remote Management

• LAN and WAN
137) for applying remote management from WAN/
(Section 17.4 on page
(Section 17.5 on page
(Section 17.6 on page
163) to configure SNMP settings. You can also specify
17
161) to change your NBG4604's
162) to configure through which
162) to configure through which
159