Media Sizes; Imageable Area - Xante PlateMaker 3 Manual

• in its original wrapper in a location with a temperature range
from 50 to 86˚ F (10 to 30˚ C) and a stable relative humidity
from 30 to 65%
• in a dark area; do not expose it to direct sunlight.

Media Sizes

Your printer allows you to use media from 3.94" x 5.83" (100 mm x
148 mm) to 13.00" x 35.50" (330 mm x 902 mm). See "Media
Sources" later in this chapter for information about which media
source to use with specific media sizes.

Imageable Area

Physical page size is different from the imageable area. The portion of a
physical page on which the printer can lay down toner is the imageable
area. The following chart lists imageable areas produced by the XANTÉ
PlateMaker 3 printer for standard media sizes.
Letter
Legal
A4
A3
B5
B4
Ledger
(11 x 17)
Executive
Universal
(13 x 18.5)
7-4 Media Optionsbb
Media Sizes
8.50" x 11.00"
(215 mm x 279 mm)
8.50" x 14.00"
(215 mm x 355 mm)
8.26" x 11.69"
(210 mm x 297 mm)
11.69" x 16.53"
(297 mm x 420 mm)
7.16" x 10.11"
(182 mm x 257 mm)
10.11" x 14.33"
(257 mm x 364 mm)
11.00" x 17.00"
(279 mm x 431 mm)
7.25" x 10.50"
(185 mm x 266 mm)
13.00" x 18.50"
(330 mm x 469 mm)
______________________________________
Imageable Areas
8.34" x 10.82"
(212 mm x 275 mm)
8.30" x 13.89"
(211 mm x 353 mm)
8.14" x 11.49"
(207 mm x 292 mm)
11.49" x 16.45"
(292 mm x 418 mm)
7.04" x 9.96"
(179 mm x 253 mm)
9.96" x 14.13"
(253 mm x 359 mm)
10.82" x 16.85"
(275 mm x 428 mm)
7.16" x 10.35"
(182 mm x 263 mm)
12.69" x 18.42"
(322 mm x 468 mm)