Media Sizes; Imageable Area - Xante Accel-a-Writer 3 Series User Manual

Caution: Using media that does not meet these guidelines may
void your printer warranty. XANTÉ is not responsible
for damages caused by media. Repair will be at the
user's expense.
To prevent damage to media, store media
• in small, flat stacks (not set on its side or end).
• in the original wrapper in a location with a temperature range
from 50 to 86˚ F (10 to 30˚ C) and a stable relative humidity
from 30 to 65%.
• in a dark area; do not expose it to direct sunlight.

Media Sizes

Your printer allows you to use media from 3.94" x 5.83" (100 mm x
148 mm) to 13.00" x 18.50" (330 mm x 470 mm). With the
Accel-a-Writer 3G, you can use media up to 13.00" x 35.50" (330
mm x 902 mm). See "Media Sources" later in this chapter about
which media source to use with specific media sizes. You can use
A3, A4, B4, letter, legal, and ledger size paper with the optional
duplexer.

Imageable Area

Physical page size is different from the imageable area. The portion of a
physical page on which the printer can lay down toner is the imageable
area. The following chart lists imageable areas produced by the XANTÉ
Series 3 printers for many standard media sizes.
7-4 Media Optionsbb ______________________________________