Section I!. Getting Ready To Sew; Connecting Machine To Power Supply; For Your Safety; Operating Instructions - Kenmore 385.18330 Owner's Manual

SECTION Ih GETTING READY TO SEW
Connecting Machine to Power Supply
Q Power supply plug _ Power switch
(_) Outlet _ Machine socket
(_ Machine plug (_ Light bulb
Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power.
1. Turn off the power switch (_)o
2. Insert the machine plug (_) into the machine socket (_),
3. Insert the power supply plugOinto the outlet (_).
4. Turn the power switch(_to turn on the power and
sewing light (_°
For Your Safety
* While in operation, always keep your eyes on the sewing
area. Do not touch any moving parts such as the thread
take-up lever, handwheel or needle.
* Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended.
- When attaching or removing any parts
- When cleaning the machine..
* Do not place anything on the foot control, when not sewing
Operating Instructions:
"For appliances with a polarized plug (one blade
wider than the other). To reduce the risk of electric shock,
this plug is intended to fit in a polarized outlet only one way
If it does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the
power outlet,. Do not modify the plug in any way,"
"Foot Controller Model YC-482J-1 is used with Sewing
Machine Model 38518330 XXX."
XXX - represents numbers 000 through 999.
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the foot control, the faster the
machine runs.
f
_J
.......... ,J