Buttonhole And Twin Needle Stitches; Auto Buttonhole; Preparation For Sewing; To Sew - Kenmore 385.18330 Owner's Manual

SECTION VII. BUTTONHOLE AND TWIN
NEEDLE STITCHES
Automatic Buttonhole
(_) stitch selector:
(_) Stitch width:
(_) Stitch length:
0 Needle thread tension:
(_) Presser foot R:
1
3 to 65
Blue zone
2 to 6
Automatic buttonhole foot
• Preparation for Sewing
(_ Groove
Q Pin
Attach the automatic buttonhole foot R. Make sure the groove
on the holder catches the pin on the foot when lowering the
presser foot,
®
• To Sew
(_) Button holder
(_ Buttonhole lever
The buttonhole size is automatically set by placing the button
in the rear of the automatic buttonhole fool
The button holder on the foot takes a button up to 1,0"(2 5 cm)
in diameter,.
Make a test buttonhole on an extra piece of the fabric to check
your settings,
Use interfacing on stretch fabrics
Pull the button holder (2k) t o the back, and place the button in _4r
Push it together tightly on the button,
Pull the buttonhole lever (_) down as far as it will go.
74