Table of Contents
Advertisement
8.1 O ve rvie w
This chapter discusses read-only information related to the device state of the NBG6604.
8.1.1 Wha t Yo u C a n Do
• Use the
C lie nt T a b le s
8.2 C lie nt T a b le s Sc re e n
You can configure the NBG6604's LAN as a DHCP server or disable it. When configured as a server, the
NBG6604 assigns IP addresses to the clients. If DHCP service is disabled, you must have another DHCP
server on that network, or else the computer must be manually configured.
Use this screen to view current DHCP client information (including MAC Address, and IP Address) of all
network clients using the NBG6604's DHCP server.
Click
Sta tus
Status > Client Tables
Fig ure 27
The following table describes the labels in this screen.
Table 13 Status > Client Tables
L ABEL
Interface
#
Online
Host Name
IP Address
screen to view the current DHCP client information
>
to open the
C lie nt T a b le s
DESC RIPT IO N
Select the interface from the drop-down list box to display current DHCP client information.
This is the index number of the host computer.
This field displays whether the connection to the host computer is up (a yellow bulb) or down (a
gray bulb).
This field displays the computer host name.
This field displays the IP address relative to the # field listed above.
NBG6604 User's Guide
C
screen.
C lie nt T a b le s
48
HA PTER
Sta tus
(Section 8.2 on page
8
48).
Advertisement
Table of Contents
