Phone User Interface - Yealink SIP- T28P User Manual

User Guide SIP-T28P IP Phone
LED Status
Solid red
Off
Memory key LED (configured as shared line key)
LED Status
Solid green
Solid red
Fast flashing green
Fast flashing red
Solid orange
Slow flashing orange
Slow flashing green
Slow flashing red
Off
There are two ways to customize specific configurations on your SIP-T28P IP phone:
Using the user interface on the IP phone.

Using the user interface in an internet browser window from your PC.

The hardware components keypad and LCD screen constitute the phone user interface,
which allows the user to execute all call operation tasks and basic configuration
changes directly on the phone. In addition, you can use the web user interface to
access all configuration settings. In many instances, it is possible to use both the phone
user interface and the web user interface to operate the phone and change settings.
However, in some instances, it is only possible to use the phone or the web user
interface.
You can customize your phone by pressing the Menu soft key to access the phone user
interface. The "Advanced Settings" options are administrator level features only, the
default password is admin (case-sensitive). For more information on customizing your
phone using the available options from the phone user interface, refer to
Your Phone on page 19.
6
Description
The monitored user is busy.
The monitored user does not exist.
Description
All the parties are idle.
The shared line is seized.
Some party receives the ringback.
The shared line receives an incoming call.
The shared line is in conversation.
The shared line conversation is placed on public hold.
The shared line conversation is placed on private hold.
For multi-party call, all the parties place the shared line
conversation on hold.
The shared line does not exist.
Customizing