Incoming Intercom Calls - Yealink SIP- T28P User Manual

4. Select the desired line from the Account ID field.
5. Enter the remote extension number in the Value field.
6. Press the Save soft key to accept the change or the Back soft key to cancel.
You can also configure an intercom key via web user interface at the path Phone->DSS
Keys.
To place an intercom call:
1. Press the intercom key when the phone is idle.
The phone is automatically connected to the extension specified in the Value field.
2. Press the intercom key again or the Cancel soft key to end the intercom call.
By default, the SIP-T28P IP phone supports to answer an incoming intercom call
automatically. The phone automatically plays a warning tone when it receives an
incoming intercom call. In addition, you can enable the phone to mute the microphone
when it automatically answers an incoming intercom call. You can also enable the
phone to automatically answer an incoming intercom call while there is already an
active call on the phone, the active call is placed on hold.
Intercom features you need to know:
Intercom features
Allows you to enable or disable the IP phone to
Intercom Allow
automatically answer an incoming intercom call.
Allows you to enable or disable the microphone on
Intercom Mute
the IP phone for Intercom calls.
Allows you to enable or disable a warning tone when
Intercom Tone
the phone receives an incoming intercom call.
Allows you to enable or disable the IP phone to
Intercom Barge automatically answer an incoming intercom call
while there is already an active call on the phone.
Advanced Phone Features
Description
75