Conference; Local Conference - Yealink SIP- T28P User Manual

To perform an attended transfer:
1. Press
2. Enter the number you want to transfer the call to.
3. Press
4. After the party answers the call, press
transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call connects by pressing the Cancel soft key.
You can create a conference with other parties using the phone's local conference
feature. You can create a conference between an active call and a call on hold (on the
same or another line) by pressing the CONF key or the Conf soft key. The network
conference feature allows you to add and remove specific conference parties.
Note
The network conference feature is not available on all servers. For more information,
contact your system administrator.
The SIP-T28P IP phone supports up to 3 parties (including yourself) in a conference call.
This is called Local Conference and is the default method of conference.
To set up a local conference call:
1. Place a call to the first party.
2. Press
The active call is placed on hold.
3. Enter the number of the second party and press
4. When the second party answers the call, you can consult with him or her before
adding to the conference.
5. Press
or the Transfer soft key during a call.
or to dial out.
or the Conf soft key to create a new call
or the Conf soft key again to join all parties in the conference.
Basic Call Features
or the Transfer soft key to complete the
, , or the Send soft key.
59