Volume; Ring Tones - Yealink SIP- T28P User Manual

User Guide SIP-T28P IP Phone
You can press the Volume key to adjust the receiver volume of currently used audio
devices (handset, speakerphone or headset), when the phone is in the dialing interface
or during a call. You can also press the Volume key to adjust the ringer volume when the
phone is idle.
To adjust the volume via phone user interface:
1. Press Menu->Settings->Basic Settings->Phone Volume.
2. Select the Handset Volume, Speaker Volume, Headset Volume or Ringer Volume,
and then press the Enter soft key.
3. Press
4. Press the OK soft key to accept the change or the Back soft key to cancel.
Note
Ring tones are used to indicate incoming calls. You can select different ring tones to
distinguish the accounts or to distinguish your phone from your neighbor's.
To select a ring tone for the phone via phone user interface:
1. Press Menu->Settings->Basic Settings->Ring Tones.
26
, or to adjust the volume.