Changing Phone Settings; Customizing Rings And Message Indicators - Cisco CP-7931G User Manual

Changing Phone Settings

You can personalize your Cisco Unified IP Phone by adjusting the ring tone, volume, and
other settings.

Customizing Rings and Message Indicators

You can customize how your phone indicates an incoming call and a new voice mail message. You can
also adjust the ringer volume for your phone.
If you want to...
Change the ring tone
per line
Adjust the volume level for
the phone ringer
Change the way that the
voice-message light on your
handset works
Change the way the audible
voice-message indicator
sounds on your phone
Cisco Unified IP Phone 7931G Phone Guide for Cisco Unified Communications Manager 8.5(1) (SCCP and SIP)
Then...
1. Choose ) > Settings > User Preferences > Rings.
(
2. Choose a phone line or the default ring setting.
3. Choose a ring tone to play a sample of it.
4. Press Select and Save to set the ring tone, or press Cancel.
Press the Volume button while the handset is in the cradle and the
headset and speakerphone buttons are off. The new ringer volume is
saved automatically.
Note Check with your system administrator to see if a minimum
ringer-volume setting was configured.
1. Log in to your Cisco Unified CM User Options web pages.
(See Accessing Your User Options Web Pages, page
2. Access your message indicator settings. (See
Settings on the Web, page
Note Typically, the default system policy is to indicate a new voice
message by displaying a steady light on the handset light strip.
1. Log in to your User Options web pages. (See
Options Web Pages, page
2. Access your message indicator settings. (See
Settings on the Web, page
Controlling Line
74.)
Accessing Your User
67.)
Controlling Line
74.)
67.)
57