Troubleshooting - Fire Sense PH03-SS Owner's Manual

PROBLEM
Pilot will not light
Pilot will not stay on
Burner will not light
PROBABLE CAUSE
Gas valve may be OFF
Fuel tank empty
Orifice blocked
Air in supply system
Loose connection
Debris around pilot
Loose connection
Thermocouple bad
Gas leak in line
Lack of fuel pressure
Pressure is low
Orifice blocked
Control valve not ON
Thermocouple bad
Pilot light assembly bent or not in
correct location

TROUBLESHOOTING

SOLUTION
Turn the gas valve ON
Refill LP gas tank
Clean or replace orifice
Purge air from lines
Check all fittings
Clean dirty area
Tighten connection
Replace thermocouple
Check connection
Fuel tank is near empty
Fuel tank is near empty
Remove, clean and replace
Turn valve to ON
Replace thermocouple
Place pilot in proper position and
retry