Troubleshooting - Fire Sense LIP-10A-TGG/60951 Manual

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE
Gas valve may be off
Fuel tank may be empty
Orifice blocked
Air in supply system
Loose connection
Main burner will
not light
Igniter fails
Gas pressure low with valve open full
New cylinder or 1st ignition
Cylinder valve on, no gas flow
AAA Battery behind igniter button is
dead
Pressure is low
Tank is low on fuel
Low burner flame
Gas hose is kinked
Control knob at max
Carbon on reflector and emitter screen
Burner unit
Thick black smoke
LED Lights will
Dead battery
not come on
Questions, problems, missing parts?
Before returning to your retailer, our exceptional customer service is available.
English & Spanish speaking.
Call Toll-Free (866) 985-7877
Email
Live Chat
Contact us for assistance: (866) 985-7877 | www.balkenehome.com
cservice@welltraveled.net
www.balkenehome.com
CORRECTIVE ACTION
Turn gas valve ON
Refill LPG tank
Clean or replace orifice
Purge air from lines. Open gas lines and depress control
knob for 2-3 minutes.
Check all fittings
Use stick lighter to manually light
Replace cylinder or regulator
Purge air from lines
Replace hose/regulator assembly
Replace with a new AAA Battery
Replace LPG tank
Fill LPG tank
Check and straighten or replace
Check for obstruction at passageways and orifices
Clean components as needed
Blockage in burner assembly—thoroughly clean burner
Replace the AA batteries located in the LED control box
9 a.m. – 9 p.m., EST
9 a.m. – 9 p.m., EST, Mon - Fri
16