Page 1
PLEASE retain this manual for future reference. CERTIFICATE TO ANSI 83.26a-2008 CONFORM TO CSA 2.37a-2008 Intertek Instruction Manual & Parts List INSTALLER: Please leave this manual to the consumer. CONSUMER: Please retain with this manual for future reference. Manufacturer: Changzhou Wellife Furnace Co., Ltd.
Tools and parts needed for assembly DANGER CARBON MONOXIDE HAZARD This appliance produce carbon monoxide which has no odor. Using it in an enclosed space can kill you. Never use this appliance in an enclosed space such as a camper, tent, car or home.
Page 3
PRECAUTIONS NOTE: PLEASE READ THE FOLLOWING SAFETY RULES WARNING: This heater must only be used outdoors. Using this product in an enclosed area may cause injury, death or property damage. Only use in a well-ventilated space. Do not use in a building, garage, or any other enclosed area.
Page 4
PRECAUTIONS CHECK THE HEATER IMMEDIATELY IF ANY OF THE FOLLOWING EXIST: 1. The smell of gas in conjunction with extreme yellow colored tips of the burner flames. 2. The heater does not reach temperature. 3. The burner makes a popping noise during use (a slight popping noise is normal when the burner is extinguished after using).
Page 6
PRECAUTIONS ATTACHING WHEEL ASSEMBLY Step 1 1-1. Locate Wheel Assembly (17) and 2 nuts/bolts contained in plastic bag with Wheel Assembly (Fig. 1). Fig. 1 Step 2 2-1. Turn Base (15) so that holes for attachment of Wheel Assembly are facing you (Fig. 2). Fig.
Page 9
PRECAUTIONS Reflector (#2) is comprised of 3 – outer pieces and 1 – center piece. Locate all 4 pieces of Reflector (#2) which are wrapped in bubble wrap. Unwrap and remove all pieces and peel off the protective blue plastic on each piece. Locate 9 bolts and 9 cap nuts in the plastic bag.
Need help?
Do you have a question about the PH01-SS and is the answer not in the manual?
Questions and answers