5.3
Plotter Setup
This paragraph provides the information necessary for setting up the plotter
display.
5.3.1
Navigation options
Navigation options, for example, waypoint switching method, may be set on the
plotter setup menu.
1. Show the plotter display and press the [MENU] key open the main menu.
2. Press the PLOTTER SETUP soft key.
Item
Waypoints
Chooses waypoint switching method. See
Switching
"switching waypoints" on page 3-51.
Course Vector
You may extend a line from the own ship
position to show ship's course. It may be a
vector (length depends on ship's speed) or a
simple line (course bar)
Set GOTO
Sets the method by which to navigate to a
Method
quick point. See paragraph "3.10.1 Navigating
to a quick point."
QP
To display destination waypoint from an
external navigation connected, select "EXT
WPT (RMB)."
D. BOX
Sets up data boxes. See paragraph 5.5.
(soft key)
WAYPOINT SWITCHING
ARRVL ALM CRCL
COURSE VECTOR
LINE
SET GOTO METHOD
1POINT
QP
INTERNAL
Display option menu
Contents of display option menu
Description
5. CUSTOMIZING YOUR UNIT
PLOTTER
SETUP
EDIT
D. BOX
RETURN
Settings
Default Setting
Arrvl Alm Crcl
Perpendicular, Arrvl
Alm Crcl, Manual
Line, Vector, Off
Line
1 Point
1 Point, 35 Points,
35 Pts/Port Service
EXT WPT (RMB),
INTERNAL
INTERNAL
5-9