System Configurations - Furuno NAVNET 1722 Operator's Manual

SYSTEM CONFIGURATIONS

All NavNet products incorporate a "network circuit board" to integrate each
NavNet product on board through an optional LAN cable (Ethernet 10BASE-T).
Each NavNet product is assigned an IP address to enable transfer of images
between other NavNet products. For example, video plotter pictures can be
transferred to a radar and vice versa. Pictures received via the NavNet may be
adjusted at the receiving end.
The number of display units which may be installed depends on the number of
network sounder connected. For a system incorporating three or more products,
a "hub" is required to process data.
For one network sounder: one radar and three plotters
For two network sounder: one radar and two plotters
NavNet system
Other NavNet unit
(GD-1700 etc.)
*PR-62: MODEL1722/1722C/1732/1732C/1723C/1733C
RU-3423: MODEL1742/1742C/1752/1752C/1762/1762C/1753C/1763C
(ex. MODEL 1722/1722C/1723C)
Display Unit
RDP-130 (monochrome)
RDP-131 (color, QVGA)
RDP-143 (color, VGA)
Remote
Controller
RMC-100
Network sounder
ETR-6/10N
ETR-30N
NavNet system
Antenna Unit
12-24 VDC
x
GPS receiver
GP-310B/320B
E/S
Navigator
External buzzer
PC
Echo sounder
Heading
sensor
Rectifier*
PR-62
RU-3423
100/110/115/220/230 VAC
1 50/60 Hz