Trip Alarm - Furuno NAVNET 1722 Operator's Manual

3. PLOTTER OPERATION
3.11.7

Trip alarm

The trip alarm informs you when you traveled a certain distance.
1. Press the [ALARM] key to open the alarm menu.
2. Use the cursor pad to select TRIP ALARM.
3. Press the EDIT soft key to show the trip alarm window.
4. Select ON with the cursor.
5. Use the cursor pad and [ENTER] knob to enter alarm range: Use ◄ or ► to
select digit; rotate the [ENTER] knob to set value.
6. Press the ENTER soft key or push the [ENTER] knob to register setting.
7. Press the Press the [ALARM] key to close the menu.
3-58
TRIP ALARM
¡
ON 0000.0nm
¤
OFF
Trip alarm window