Alarm Information - Furuno NAVNET 1722 Operator's Manual

3.11.8

Alarm information

When an alarm setting has been violated the buzzer sounds and the speaker
icon appears (in red on the color model). Press the [CLEAR] key to silence the
alarm. You can see which alarm has been violated on the alarm menu display. In
the example below the arrival alarm has been violated.
1. Press the [ALARM] key. The name of the offending alarm appears in the
ALARM INFORMATION window.
2. Press the CLEAR ALARM soft key to acknowledge the alarm (and silence the
alarm if it was not already silenced with the [CLEAR] key.) For the color
model, the speaker icon changes from red to background color. The icon
remains on the screen until the cause of the alarm is eliminated or the alarm
is disabled.
Note: If more than one alarm has been violated the message CONTINUE
3. Press the [ALARM] key to close the alarm menu.
AUDIO ALARM
ARRIVAL ALARM
ANCHOR WATCH ALARM
PROXIMITY ALARM
XTE ALARM
SPEED ALARM
TRIP ALARM
ALARM INFOMATION
ARRIVED
AT WAYPOINT.
appears at the bottom of the alarm information window. In this case
press the NEXT INFO soft key to see which other alarms have been
violated.
ALARM1
INT & EXT BUZZ
ON 0.010nm
EDIT
OFF 0.010nm
NEXT
OFF
CLEAR
OFF 0.050nm
ALARM
OFF
NEXT
OFF 0000.0nm
RETURN
CONTINUE
Alarm menu)
3. PLOTTER OPERATION
INFO
PAGE
Speaker icon
3-59