Plotter Setup; Navigation Options - Furuno 1833 Operator's Manual

5. CUSTOMIZING YOUR UNIT
5.3

Plotter Setup

This paragraph provides the information necessary for setting up the plotter
display.
5.3.1

Navigation options

Navigation options, for example, waypoint switching method, may be set on the
PLOTTER SETUP menu.
1. Show the plotter display, then press the [MENU] key open the main menu.
2. Press the PLOTTER SETUP soft key.
Item
Waypoint Chooses waypoint switching method.
Switching See "Switching waypoints" on page
3-50.
Course Vector You may extend a line from the own
ship position to show ship's course. It
may be a vector (length depends on
ship's speed) or a simple line (course
bar).
Set GOTO Sets the method by which to navigate
Method to a quick point. See paragraph
"3.10.1 Navigating to a quick point."
D. BOX Sets up data boxes. See "paragraph 5.5."
(soft key)
5-8
WAYPOINT SWITCHING
ARRVL ALM CRCL
COURSE VECTOR
LINE
SET GOTO METHOD
1POINT
Plotter setup menu
Contents of plotter setup menu
Description
PLOTTER
SETUP
EDIT
D. BOX
RETURN
Settings Default Setting
Perpendicular, Arrvl Alm Crcl
Arrvl Alm Crcl,
Manual
Line, Vector, Off Line
1 Point, 35 Points, 1 Point
35Pts/Port SVC