Marks, Lines; Entering A Mark; Changing Mark Attributes - Furuno NAVNET 1722 Operator's Manual

3.7

Marks, Lines

Marks are useful for denoting important points such as a good fishing spot.
Marks can be inscribed in seven shapes and seven colors (MODEL1722C
/1723C series): Red, yellow, green, light-blue, purple, blue and white.
3.7.1

Entering a mark

1. Place the cursor on the location where you want a mark to appear.
2. Press the MARK ENTRY soft key. (Press the [HIDE/SHOW] key if the plotter
soft keys are not shown.)
The mark is inscribed in the size and shape selected on the MARKS & LINES
menu. The default mark attributes are size, normal; color (MODEL1722C/1723C
series), yellow, and shape, hollow circle (
3.7.2

Changing mark attributes

You can select the shape and color for marks on the MARKS & LINES menu.
1. Press the [MENU] key to show the menu.
2. Press the CHART SETUP, TRACKS & MARKS CONTROL and MARK
SETUP soft keys to show the MARKS & LINES menu.
TRACKING
3. For the MODEL1722C/1723C series, do the following to select mark and
line color.
Select MARKS/LINES COLOR and press the EDIT soft key.
Use the cursor pad to choose color desired and press the ENTER soft key.
¡
MARKS/LINES COLOR
YELLOW
MARKS SHAPE
¡
LINES STYLE
.
MARKS SIZE
LARGE
MODEL1722C/1723C series
Mark shapes
○
).
MARKS &
LINES
MARKS SHAPE
EDIT
LINES STYLE
MARKS SIZE
RETURN
TRACKING
MODEL1722 series
Marks & lines menu
3. PLOTTER OPERATION
MARKS &
LINES
¡
EDIT
.
LARGE
RETURN
3-25