5.3
Plotter Setup
This paragraph provides the information necessary for setting up the plotter
display.
5.3.1
Navigation options
Navigation options, for example, waypoint switching method, may be set on the
PLOTTER SETUP menu.
1. Show the plotter display, then press the [MENU] key open the main menu.
2. Press the PLOTTER SETUP soft key.
Item
Waypoint
Chooses waypoint switching method. See
Switching
"switching waypoints" on page 3-50.
Course
You may extend a line from the own ship position to
Vector
show ship's course. It may be a vector (length
depends on ship's speed) or a simple line (course
bar).
Set GOTO
Sets the method by which to navigate to a quick
Method
point. See "3.10.1 Navigating to a quick point."
D. BOX
Sets up data boxes. See paragraph 5.5.
(soft key)
Plotter setup menu
Contents of plotter setup menu
Description
5. CUSTOMIZING YOUR UNIT
PLOTTER
SETUP
EDIT
D. BOX
RETURN
Settings
Perpendicular, Arrvl Alm
Crcl, Manual
Line, Vector, Off
1 Point, 35 Points,
35 Pts/Port Service
5-9