Function Key Setup - Furuno NAVNET 1722 Operator's Manual

5. CUSTOMIZING YOUR UNIT
5.3.2

Function key setup

The function keys provide one-touch call up of a desired function. The default
plotter function key settings are as shown in the table below.
Function Key
1
2
3
4
5
If the above settings are not to your liking you may change them as follows:
1. Press the [MENU] key.
2. Press the FUNCTION KEY SETUP soft key.
3. Select the soft key you want to program and press the EDIT soft key. A menu
shows the functions available and the current selection is highlighted.
5-10
Default Function
Start/stop recording/plotting own ship's track.
Edit mark/line.
Ruler (measure range and bearing between two points).
Add new waypoint.
Alphanumeric waypoint list.
Function key
setting
Function
key label
Plotter function key menu
Scroll
Plotter function key options
SOFT KEY 1
TRK: TRACK ON/OFF
T
R
SOFT KEY 2
K
EML: EDIT MK/LINE
E
M
SOFT KEY 3
L
RUL: RULER
R
U
L
SOFT KEY 4
ADD: ADD NEW WPT
A
D
SOFT KEY 5
D
ALP: ALPHA LIST
A
L
P
SOF TKEY 1
OFF
ADD: ADD NEW WPT
MWP: MOVE WPT
RUL: RULER
GWP: GOTO WPT
GRT: GOTO ROUTE
EML: EDIT MK/LINE
TRK: TRACK ON/OFF
TTM: TTM ON/OFF
ETT: DEL TGT TRK
ALP: ALPHA LIST
LCL: LOCAL LIST
RTE: ROUTE LIST
DBX: D. BOX ON/OFF
CHG: CHANGE CNTRL
Function Key Label
TRK
EML
RUL
ADD
ALP
FUNC
KEY
EDIT
RETURN