Brother DCP7010 Service Manual page 105

(2) Remove the two bind B M4x12 taptite screws and the rear chute cover spring.
(3) Remove the inner chute.
Taptite, bind B
M4x12
Rear chute cover spring
NOTE: Re-assemble the inner chute while pushing onto the pinch roller of the inner chute
with the eject roller of the joint cover ASSY.
Joint cover ASSY
Inner chute
Taptite, bind B M4x12
Eject roller
5 -3 4
Inner chute
Pinch roller
Pinch roller
Confidential