Pickup Roller Holder Assy - Brother DCP7010 Service Manual

5.1.16 Pickup Roller Holder ASSY

(1) Turn the printer upside down.
(2) Remove the six bind B M4x12 taptite screws, and then remove the chute base.
Taptite, bind B M4x12
FG harness ASSY 5
NOTE: When re-assembling the chute base, check that the bind B M4x12 taptite screws (A)
and (B) shown in the figure above are secured correctly.
Taptite, bind B M4x12 (B)
Taptite, bind B M4x12 (A)
Taptite, bind B M4x12
Printer top side
(Printer body upside down)
5 -3 8
Chute base
Confidential