Table of Contents
Advertisement
8.4.6.2
Printout of firmware switch data (Function code 11)
Function
The machine prints out the setting items and contents specified by the firmware switches.
Operating Procedure
(1) MFC7420/7820N
Press the 1 key twice in the initial stage of the maintenance mode.
DCP7010/7020/7025
Press the
the LCD. Then press the Set key .
The "PRINTING" will appear on the LCD.
(2) The machine prints out the configuration list as shown in the figure below.
(3) Upon completion of printing, the machine returns to the initial stage of the maintenance
mode.
key or
key several times to display the "MAINTENANCE 11" code on
8 - 1 4
Confidential
Advertisement
Table of Contents
Troubleshooting
