Brother DCP7010 Service Manual page 208

This printer does not appear in Chooser (Mac OS
S-3
®
OS X 10.2.4 or greater).
User Check
(1) Check the printer is turned on.
(2) Check the USB cable is connected correctly.
(3) Check the printer driver is installed correctly.
Possible cause Step
Printer 1
connection
Driver 2
installation
Make sure that the supplied Macintosh
S-4 and that it is selected with Chooser (Mac OS
®
OS X 10.2.4 or greater).
Check
Select 'Apple System
Profiler' in Apple Menu.
Are the following items
indicated in the USB box
of the Device and Volumes
tab?
Product ID:
0180 (for MFC7420)
0181 (for MFC7820N)
0182 (for DCP7010)
0183 (for DCP7020)
0184 (for DCP7025)
Vender:
Brother International
Corporation (or 0x4f9)
Are there the following
files in the Extensions
Folder of System Folder?
<For System 9.1 – 9.2>
BR_PrintMoniter
(laser)
Brother Laser
9 -2 0
®
9.1 to 9.2) or Print center (Mac
Result
No Check the printer is turned on
and the USB cable is connected
correctly.
Check that the USB cable used
is the shielded twisted pair type
and 5 m or less.
Try to connect the printer and
PC with the USB cable directly.
No Try to re-install the printer
driver.
Yes Turn off the printer and PC
power switch, and check all
connections between them.
Then, turn them on again.
®
printer driver is installed in the Hard Disk
®
9.1 to 9.2) or Print Center (Mac
Remedy
Confidential