General Chassis; Power Supply Table; Temperature - Brocade Communications Systems 6910 Manual

Common objects
Name, Identifier, and Syntax
snChasUnitPartNum
brcdIp. 1.1.1.4.1.1.7
Syntax: DisplayString
snChasUnitActualTemperature
brcdIp.1.1.1.4.1.1.4
Syntax: Integer

General chassis

Name, Identifier, and Syntax
snChasSerNum
brcdIp.1.1.1.1.2
Syntax: DisplayString
snChasNumSlots
brcdIp.1.1.1.1.24
Syntax: Integer32

Power supply table

Name, Identifier, and Syntax
snChasPwrSupply2Table
brcdIp.1.1.1.2.2
snChasPwrSupply2Entry
brcdIp.1.1.1.2.2.1
snChasPwrSupply2Unit
brcdIp.1.1.1.2.2.1.1
snChasPwrSupply2Index
brcdIp.1.1.1.2.2.1.2
Syntax: Integer32
snChasPwrSupplyOperStatus
brcdIp.1.1.1.2.2.1.4
Syntax: Integer

Temperature

Refer to the chapter "Traps and Objects to Enable Traps" on page 57 for objects dealing with traps.
Name, Identifier, and Syntax
snChasActualTemperature
brcdIp.1.1.1.1.18
Syntax: Integer
22
Access Description
Read only The part number of the chassis for each unit. If the part
number is unknown or unavailable then the value should be a
zero length string.
Read only Shows the average of all sensors in the current unit. Each unit
is 0.5 degrees Celsius.
Values are from -110 to 250.
Access Description
Read only The serial number of the chassis. If the serial number is unknown
or unavailable thenthe value should be a zero length string.
This object can have up to 128 characters.
Read only Shows the maximum number of units in a stack.
Access Description
N/A A table containing power supply information. Only installed power
supplies appear in the table.
N/A A row in the power supply table. One row appears for each power
supply.
Read only The index to power supply table.
Read only The index to power supply table.
Read only Shows the status of the power supply:
•
other(1) – Status is neither normal(2) or failure(3).
•
normal(2)
•
failure(3)
Access Description
Read only Shows the average temperature of all sensors in all units. Each
unit is 0.5 degrees Celsius.
Values are from -110 – 250
NOTE: For per-unit (per thermal sensor), see
UnitActualTemperature and snAgentTemp2Value instead.
Brocade 6910 Ethernet Access Switch MIB Reference
53-1002582-01