Object For Stacking; Agent Temperature Table For Stacking - Brocade Communications Systems 6910 Manual

Object for Stacking

Agent temperature table for stacking

The Agent Temperature Table shows temperature information for a module's temperature sensor in
the Stacking devices.
Name, Identifier, and Syntax
snAgentTemp2Table
brcdIp.1.1.2.13.2
snAgentTemp2Entry
brcdIp.1.1.2.13.2.1
snAgentTemp2UnitNum
brcdIp.1.1.2.13.2.1.1
Syntax: Integer
snAgentTemp2SlotNum
brcdIp.1.1.2.13.2.1.2
Syntax: Integer
snAgentTemp2SensorId
brcdIp.1.1.2.13.2.1.3
Syntax: Integer
snAgentTemp2Value
brcdIp.1.1.2.13.2.1.5
Syntax: Integer
Brocade 6910 Ethernet Access Switch MIB Reference
53-1002582-01
Access Description
N/A This table lists the temperature of each unit in the stack.
N/A A row in the unit temperature table.
N/A The unit number which contains the temperature sensor
represented by this row.
N/A The slot number of module which contains the temperature
sensor represented by this row. (The value of this object is
always 1.)
N/A The temperature sensor ID of the member module that is
represented by this row.
The first detector is located between the physical layer ASICs
on the main board. The second and third detector are located
on right and left side of daughter board.
Read only Temperature of the sensor represented by this row. Each unit is
0.5 degrees Celsius.
Values are from -110 to 250.
Chapter
12
55