Software Image
Name, Identifier, and Syntax
snAgWriteNVRAM
brcdIp.1.1.2.1.3
Syntax: Integer
snAgConfigFromNVRAM
brcdIp.1.1.2.1.4
Syntax: Integer
File download and upload
The following objects manage file downloads and uploads.
NOTES: When uploading or downloading configuration files to and from the TFTP server using
SNMP, check the following:
NOTE
For a successful download or upload, first write snAgTftpServerAddrType, snAgTftpServerAddr,
snAgImgFname, and then snAgImgLoad.
24
Access
Read-write
Read-write
•
Make sure that user has administrative access (privilege=15) on the device; otherwise,
the user will not be able to upload files to the TFTP server.
Description
Saves all configuration information to NVRAM of the agent. The
following values can only be read:
•
normal(1)
•
error(2) – Operation failed or the flash is bad
•
writing(4) – Agent is writing NVRAM flash
The following value can be written:
NOTE: write(3) – Write operation. The agent will return a
response even before the write operation is complete. The
read values will be written until the write operation is
finished. New write requests will be rejected until an
error(2) or normal(1) value is obtained.
Configures the switch from NVRAM of the agent.
The following value can be written:
•
config(3) – Do configuration.
The agent will return a response after configuration is done.
The following values can only be read:
•
normal(1)
•
error(2) – Operation failed or bad flash
•
busy(5) – Operation not allowed at this time, flash is busy
Brocade 6910 Ethernet Access Switch MIB Reference
53-1002582-01