Traps For Spanning Tree Protocol; Traps For Rmon Events - Brocade Communications Systems 6910 Manual

Brocade supports the following traps from RFC 2863:
Trap Name and Number
linkDown
1.3.6.1.6.3.1.1.5.3
linkUp
1.3.6.1.6.3.1.1.5.4

Traps for spanning tree protocol

Brocade supports for the following traps for Spanning Tree Protocol from RFC 1493.
Trap Name and Number
newRoot
1.3.6.1.2.1.17.0.1
topologyChange
1.3.6.1.2.1.17.0.2

Traps for RMON events

Brocade supports for the following traps for RMON from RFC 2819.
Trap Name and Number
risingAlarm
1.3.6.1.2.1.16.0.1
fallingAlarm
1.3.6.1.2.1.16.0.2
Brocade 6910 Ethernet Access Switch MIB Reference
53-1002582-01
Varbind Description
ifIndex(1) A failure in one of the communication links.
ifAdminStatus(7) For example,
Interface <port-name> <port-num>, state down
ifOperStatus(8)
ifIndex(1) The communication link is up.
ifAdminStatus(7) For example,
Interface <port-name> <port-num>, state up
ifOperStatus(8)
Description
Indicates that the sending agent has become the new root of the Spanning
Tree. The trap is sent by a bridge soon after its election as the new root, for
example, upon expiration of the Topology Change Timer immediately
subsequent to its election.
Is sent by a bridge when any of its configured ports transitions from the
Learning state to the Forwarding state, or from the Forwarding state to the
Blocking state. The trap is not sent if a newRoot trap is sent for the same
transition.
Varbind Description
alarmIndex, The SNMP trap that is generated when an alarm entry
alarmVariable, crosses its rising threshold and generates an event that is
alarmSampleType, configured for sending SNMP traps.
alarmValue,
alarmRisingThreshold
alarmIndex, The SNMP trap that is generated when an alarm entry
alarmVariable, crosses its falling threshold and generates an event that is
alarmSampleType, configured for sending SNMP traps.
alarmValue,
alarmFallingThreshold
Standard traps
59