Software Image Details - Brocade Communications Systems 6910 Manual

Ethernet access switch
Hide thumbs Also See for 6910:
Table of Contents

Advertisement

Software Image
Name, Identifier, and Syntax
snAgTftpServerAddrType
brcdIp.1.1.2.1.65
Syntax: InetAddressType
snAgTftpServerAddr
brcdIp.1.1.2.1.66
Syntax: InetAddress

Software image details

The following objects show information about software images in a device. These objects are
available in all devices.
Name, Identifier, and Syntax
snAgImgVer
brcdIp.1.1.2.1.11
Syntax: DisplayString
snAgSoftwareFeature
brcdIp.1.1.2.1.41
Syntax: OctetString
26
Access
Description
Read-write
Shows the IP address type of the TFTP server that will be used to
download and upload image and configuration files. Supported
address types are:
ipv4(1)
ipv6(2)
ipv6z(4)
Default: IPv4
Read-write
Shows the IP address of the TFTP server that will be used to
download and upload image and configuration files.
Access
Description
Read-only
Shows the version of the running software. The software image
file name is displayed in the format:
major.0.minor.maintenance
It can have up to 32 characters.
Read-only
A bit string representing the software feature of the running
switch/router image. Each bit can have one of the following
values:
0 – The feature is not available
1 – The feature is available
Bit 0 is the least significant bit of an octet, and bit 7 is the most
significant bit of an octet.
Octet 0, bit 0 – RMON
Octet 0, bit 1 – IPX switching
Octet 0, bit 2 – Server Load Balancing
Octet 0, bit 3 – Layer 3 filter in switch
Octet 0, bit 4 – IPX routing
Octet 0, bit 5 – AppleTalk routing
Octet 0, bit 6 – IP multicast routing
Octet 0, bit 7 – Local access control
Octet 1, bit 0 – BGP routing
Octet 1, bit 1 – Loopback interface
Octet 1, bit 2 – BigIron multi-management module
Octet 1, bit 3 – BigIron SYSIF II
Octet 1, bit 4 – BigIron POS support
Octet 1, bit 5 – AppleTalk cable VLAN
Octet 1, bit 6 – 64 subnet
Octet 1, bit 7 – multi-slot trunk
Octet 2, bit 0 – TACACS
Octet 2, bit 1 – Gigabit Ethernet port auto-negotiation mode
Octet 2, bit 2 – FSRP
Octet 2, bit 3 – Exodus requested OSPF enhancement
Octet 2, bit 4 – OSPF NSSA
Octet 2, bit 5 – POS
Brocade 6910 Ethernet Access Switch MIB Reference
53-1002582-01

Advertisement

Table of Contents
loading

Table of Contents