Brocade Communications Systems 6910 Manual page 37

Name, Identifier, and Syntax
snAgImgFname
brcdIp.1.1.2.1.6
Syntax: DisplayString
snAgImgLoad
brcdIp.1.1.2.1.7
Syntax: Integer
snAgCfgFname
brcdIp.1.1.2.1.8
Syntax: DisplayString
snAgCfgLoad
brcdIp.1.1.2.1.9
Syntax: Integer
Brocade 6910 Ethernet Access Switch MIB Reference
53-1002582-01
Access Description
Read-write Shows the name of the image file, including the path, that is
currently associated with the system. When the object is not used,
the value is a zero length string. It can have up to 127 characters.
Read-write Downloads or uploads a new software image to the agent.
The following values can be read:
Error values: from normal(1) to operationError(17) and
tftpWrongFileType(23).
loading(18) – Operation is in process.
The following values can be set:
•
uploadMPPrimary(19) – Upload the Startup image from MP
flash to TFTP server.
•
downloadMPPrimary(20) – Swaps the roles of the startup
and non-startup images in flash.
•
uploadMPSecondary(21) – Upload the Non-Startup image
from MP flash to TFTP server.
•
downloadMPSecondary(22) – Download the Non-Startup
image from TFTP server to MP flash.
MP is the management processor.
The image filename is defined in snAgImgFname. The TFTP server
address is defined in snAgTftpServerAddrType and
snAgTftpServerAddr. The write request will be rejected during
loading until error or normal.
Read-write Name of the config file including path currently associated with
the system. When the object is not used, the value is a zero length
string. This object can have up to 127 characters.
Read-write Downloads or uploads a configuration file to the agent.
Error values: from normal(1) to operationError(17) and
tftpWrongFileType(29).
loading(18) – Operation is in process.
The following values can be set for operations with the TFTP
server:
•
uploadFromFlashToServer(20) – Upload the config from
flash to TFTP server.
•
downloadToFlashFromServer(21) – Download the config to
flash from TFTP server.
•
uploadFromDramToServer(22) – Upload the config from
DRAM to TFTP server.
•
downloadToDramFromServer(23) – Download the config to
DRAM from TFTP server.
The config filename is defined in snAgCfgFname.
The TFTP server address is defined in snAgTftpServerAddr.
The write request will be rejected during loading until error or
normal.
Software Image
25