Standard Traps; System Status Traps - Brocade Communications Systems 6910 Manual

Standard traps

Name, OID, and Syntax
fdryTrapReceiverAddr
brcdIp.1.1.10.1.1.1.1.3
Syntax: InetAddress
fdryTrapReceiver
CommunityOrSecurityName
brcdIp.1.1.10.1.1.1.1.4
Syntax: OctetString
(size(0..32))
fdryTrapReceiverUDPPort
brcdIp.1.1.10.1.1.1.1.5
Syntax: Integer32
(0..65535)
fdryTrapReceiverSecurityModel
brcdIp.1.1.10.1.1.1.1.6
Syntax: SecurityModel
fdryTrapReceiverSecurityLevel
brcdIp.1.1.10.1.1.1.1.7
Syntax: SecurityLevel
fdryTrapReceiverRowStatus
brcdIp.1.1.10.1.1.1.1.8
Syntax: RowStatus
Standard traps
This section present the standard traps supported on devices.

System status traps

Brocade supports the following traps from RFC 1215:
Trap Name and Number
coldStart
1.3.6.1.6.3.1.1.5.1
warmStart
1.3.6.1.6.3.1.1.5.2
authenticationFailure
1.3.6.1.6.3.1.1.5.5
58
Access Description
Read-create The IP address of the SNMP manager that will receive the trap.
Read-create The community string to use to access the trap receiver. This
object can have up to 32 octets. In the case of USM (SNMPv3)
security model, this object is used to provide the security name.
Writing a null string sets the name to "public".
Read-create The UPD port number of the trap receiver.
Valid value: 0 – 65535
Default: 162
Read-create The version of trap format to be used.
Default: v1
Read-create Used for USM (SNMPv3) security model to specify the level of
security. The security name is provided by
fdryTrapReceiverCommunityOrSecurityName.
Default: noAuth
Read-create This variable is used to create, or delete a row in this table.
When a row in this table is in active(1) state, no objects in that
row can be modified except this object.
When a row in this table is in active(1) state, the switch
supports writing active(1) or destroy(6), the former of which has
no effect, and the latter of which deletes this entry.
Varbind Description
(None) Indicates that the sending protocol entity is re-initializing itself: the
agent's configuration or the protocol entity implementation may
be altered.
(None) Indicates that the sending protocol entity is re-initializing itself;
however, the agent configuration nor the protocol entity
implementation is not altered.
(None) Indicates that the sending protocol entity is the addressee of a
protocol message that is not properly authenticated. While
implementations of the SNMP must be capable of generating this
trap, they must also be capable of suppressing the emission of
such traps through an implementation-specific mechanism.
Brocade 6910 Ethernet Access Switch MIB Reference
53-1002582-01