Removing A Side Panel - NEC MC2200 User Manual

Removing a Side Panel

To install options in your system, you must remove the side panel on the left side of the
system (as viewed from the front). The side panel on the right side of the system (as
viewed from the front) only has to be removed when adding removable media devices.
The right side panel removes in the same manner as the left side panel.
For proper cooling and airflow, do not operate the system with the
side panels removed. Always replace the panels before powering on
the system.
If you are removing the side panel after the system is set up, you
must first power off the system and all external devices and then
Unplug the system power cord
To remove a side panel:
1. Power off the system and ensure it is disconnected from the ac wall outlet.
2. The side panel is secured to the chassis with three thumbscrews. Loosen the
thumbscrews securing the side panel.
3. Slide the side panel toward the rear of the chassis. This unlocks the locking fingers
behind the side panel.
4. Pull the side panel out and away from the chassis.
! CAUTION
!
WARNING
Upgrading Your System 4-3