Installing A Side Panel - NEC MC2200 User Manual

Installing a Side Panel

1. Before replacing the side panel, make sure no tools or loose parts have been left
inside the system chassis.
2. Make sure all option boards are firmly seated in their respective slots and that all
interior cables are properly connected.
3. Insert the metal tabs on the top and bottom of the side panel into their slots on the
chassis. Slide the side panel forward as far as it will go.
4. Secure the three side panels thumbscrews.
Note:
reconnect the peripherals, and power on the peripherals and system.
4-4 Upgrading Your System
Figure 4-1 Removing a System Side Panel
If your system is already set up, plug the system back in,