System Status Hardware Support Information - NEC MC2200 User Manual

System Status Hardware Support Information

This appendix helps you identify and find a system status hardware items indicated by
one of several software monitoring components.
The software monitoring components as they are related to the hardware system status
items are listed in the following table:
Software Monitoring Components/Hardware System Status Items
Software Monitoring Component
ESMPRO Server Management
EMP / RCU
Not all items can be monitored with every software component. Monitoring capability
relates to how the software component interacts with system hardware. ESMPRO
interacts with all hardware components and EMP/RCU interacts with Baseboard
hardware. In this system, the SCSI Accessed Fault-Tolerant Enclosure (SAF-TE)
interface board is connected to the SCSI backplane. (See Figure "System Chassis (Right
Side View)" under "System Overview" in Chapter 1 of this guide.)
The "Monitor Matrix" table below shows which component relates to selected status
items. This table also relates the terminology used by the software component to the
system hardware.
Item
Chassis front fan
Chassis upper rear fan
Chassis lower rear fan
Internal disk fan – upper
Internal disk fan – middle
Internal disk fan – lower
Intrusion switch - front
Interlock switch - left side
(front view)
Interlock switch - right side
(front view)
(1)Power Supply fan
(2)Power Supply fan
BB = Baseboard
SCSI-BP = SCSI Backplane
B-2 System Status Hardware Support Information
Monitor Matrix
ESM PRO
As Item
N/A
N/A
Internal upper disk
(SAF-TE)
Middle
Lower
Chassis cover
N/A
N/A
(1) Power (SAF-TE)
(2) Power (SAF-TE)
Hardware System Status Item
View status based on polling the machine
View status in the hardware system event log
EMP / RCU Item Location
N/A BB
N/A Pwr. Bd
N/A Pwr. Bd
N/A SCSI-BP
N/A SCSI-BP
N/A SCSI-BP
N/A SCSI-BP
N/A SCSI-BP
N/A SCSI-BP
N/A P. S. (Bottom)
N/A P.S. (Top)
Board Marking
J7
J11
J12
J2
J1
J3
J6
J5 pins 1, 2
J5 pins 3, 4
N/A
N/A