Power On/Off - NEC LS2400 User Manual

Serial Line - must be filled out when the line selection is set to Direct
!
connect (Serial Line).
Connect - initiates connection to the connected server. When this button
!
is clicked, you are prompted for the EMP password.
Config - displays the Phonebook dialog.
!
Cancel - exits the Connect dialog without any action taken.
!
Help - displays dialog level help information.
!

Power On/Off

Selecting Power On/Off from the Action menu allows you to
power the server on or off, with post-power-up options. It
generates the Power on/off dialog.
Options available in the dialog are:
Power ON - powers on the server.
!
Power OFF - powers off the server. This option is not allowed if the
!
server is configured in RESTRICTED mode for EMP operations.
Post-power-up option - sets the mode selection of the server to EMP
!
active or BIOS redirection. The setting is available after the next power-
up. The default selection is EMP active.
Cancel - exits the dialog without any action taken.
!
Help - displays dialog level help information.
!
C-10 Emergency Management Port
Baud Rate - must be 19200 for EMP to connect properly.
COM Port No. - set the COM Port number to which the
null modem serial cable is connected.
Power On/Off Dialog